GHD MK3.1



GHD MK3 Cable with 2 pin EU Plug

GHD MK3 Cable with 2 pin EU Plug

Replacement GHD MK3 Cable with 2 pin EU plug. Compatible with the following GHD models; MK3, MS, SS, 3.1, SS2, 4.0, 4.1 and early version 4.2, Early...
GHD MK3 Cable with 3 pin UK Plug

GHD MK3 Cable with 3 pin UK Plug

Replacement GHD MK3 Cable with 3 pin UK Plug. Compatible with the following GHD models; MK3, MS, SS, 3.1, SS2, 4.0, 4.1 and early version 4.2, Early...
Plug Adaptor, EU 2 Pin to UK 3 Pin

Plug Adaptor, EU 2 Pin to UK 3 Pin

Plug Adaptor to convert EU 2 pin plug to UK 3 Pin Plug. NEW
Plug Adaptor, EU 2 Pin to Australian 2 Pin

Plug Adaptor, EU 2 Pin to Australian 2 Pin

Plug Adaptor to convert EU 2 pin plug to Australian 2 Pin. NEW
Plug Adaptor, EU 2 Pin to American 2 Pin

Plug Adaptor, EU 2 Pin to American 2 Pin

Plug Adaptor to convert EU 2 pin plug to American 2 Pin. NEW
GHD MK3 Cable Connector

GHD MK3 Cable Connector

Replacement Cable connector For use with MK3 Cable Compatible with the following GHD models; MK3, MS, SS, 3.1, SS2, 4.0, 4.1 and early version 4.2,...
GHD MK3.1 Backing Plate

GHD MK3.1 Backing Plate

Backing Plate. Plastic plate holder for GHD MK3.1. NEW
160ohm Ceramic Heater

160ohm Ceramic Heater

160ohm Ceramic Heater, 15mm x 70mm Compatible with GHD MK3 & 3.1 Models Can also be fitted to GHD SS & SS2, however this replacement is smaller in...
Thermal Fuse

Thermal Fuse

Fully Insulated 240° thermal fuse. Compatible with GHD; MK3.1, SS2, 4.0, 4.1, 4.2, SS4.0, 5.0, SS5.0. NEW
GHD MK3.1 Complete PCB

GHD MK3.1 Complete PCB

Original Switch and Non Switch Side PCB for GHD MK3.1. USED.
GHD MK3.1 Hinge Pin & Spring

GHD MK3.1 Hinge Pin & Spring

Hinge Pin & Spring compatible with GHD MK3.1, SS2, 4.0, 4.1, early version 4.2, Early Version MS4.0 & Early Version SS4.0 (Early version...
Pair of GHD MK3.1 Hinge Covers

Pair of GHD MK3.1 Hinge Covers

Pair of plastic hinge covers compatible with GHD MK3.1 & SS2 Models. USED
Pair of GHD MK3.1 Hinge Covers Plain Black

Pair of GHD MK3.1 Hinge Covers Plain Black

Pair of plastic hinge covers compatible with GHD MK3.1 & SS2 Models. NEW.
Cable Restrainer

Cable Restrainer

The small platic restrainer that holds the cable in place located in the cable cover. Compatible with all GHD's which take the MK3 cable: MK3, MS,...
Rear Band

Rear Band

The rubber band the goes over the cover plate for the rear of the irons where the cable connects. Compatible with GHD MK3, SS, 3.1, SS2. USED
3.1b Switch Arm

3.1b Switch Arm

Original Used GHD MK3.1b Switch Arm
3.1b Non Switch Arm

3.1b Non Switch Arm

Original used 3.1b Non Switch Arm
3.1b Switch Cover

3.1b Switch Cover

Original used 3.1b switch cover
3.1b Non Switch Cover

3.1b Non Switch Cover

Original used 3.1b Non switch cover
3.1b Cable Cover

3.1b Cable Cover

Original used 3.1b cable cover