GHD MS4.0 Old Version

There are two versions of the GHD MS4.0. The older version has five lines at the tips of the GHD, the new version has a series of dots. The products listed below are suitable for the Old Version. If you have the New Version, please reselect 'New Version' from the models listed.


GHD MK3 Cable with 2 pin EU Plug

GHD MK3 Cable with 2 pin EU Plug

Replacement GHD MK3 Cable with 2 pin EU plug. Compatible with the following GHD models; MK3, MS, SS, 3.1, SS2, 4.0, 4.1 and early version 4.2, Early...
GHD MK3 Cable with 3 pin UK Plug

GHD MK3 Cable with 3 pin UK Plug

Replacement GHD MK3 Cable with 3 pin UK Plug. Compatible with the following GHD models; MK3, MS, SS, 3.1, SS2, 4.0, 4.1 and early version 4.2, Early...
Plug Adaptor, EU 2 Pin to UK 3 Pin

Plug Adaptor, EU 2 Pin to UK 3 Pin

Plug Adaptor to convert EU 2 pin plug to UK 3 Pin Plug. NEW
Plug Adaptor, EU 2 Pin to Australian 2 Pin

Plug Adaptor, EU 2 Pin to Australian 2 Pin

Plug Adaptor to convert EU 2 pin plug to Australian 2 Pin. NEW
Plug Adaptor, EU 2 Pin to American 2 Pin

Plug Adaptor, EU 2 Pin to American 2 Pin

Plug Adaptor to convert EU 2 pin plug to American 2 Pin. NEW
GHD MK3 Cable Connector

GHD MK3 Cable Connector

Replacement Cable connector For use with MK3 Cable Compatible with the following GHD models; MK3, MS, SS, 3.1, SS2, 4.0, 4.1 and early version 4.2,...
Mini 70ohm Ceramic Heater

Mini 70ohm Ceramic Heater

70ohm Ceramic Heater, 70mm x 7mm. Compatible with GHD MS4.0 & MS5.0
Mini 70ohm Ceramic Heater with Thermistor

Mini 70ohm Ceramic Heater with Thermistor

70ohm Ceramic Heater, 70mm x 7mm. With fitted Thermistor NTC. Compatible with GHD MS4.0 & MS5.0
Mini Thermal Fuse

Mini Thermal Fuse

Replacement thermal fuse compatible with GHD; MS4.0 & MS5.0. These come undressed so you may require kapton tape and connection hoops if not...
Pre-programmed MK4 control IC

Pre-programmed MK4 control IC

Pre-programmed control IC for repairing faulty MK4 PCB's where this component has failed. N.B. The removal and replacement of PIC's require...
Pair of GHD MK4 Hinge Covers

Pair of GHD MK4 Hinge Covers

Pair of plastic hinge covers compatible with GHD MK4.0, 4.1 and early version 4.2 (Early version 4.2 GHD's have 5 lines at the tips of the plastic...
Pair of GHD MK4 Hinge Covers Plain Black

Pair of GHD MK4 Hinge Covers Plain Black

Pair of plastic hinge covers compatible with GHD MK4.0, 4.1 and early version 4.2 (Early version 4.2 GHD's have 5 lines at the tips of the plastic...
GHD MK3.1 Hinge Pin & Spring

GHD MK3.1 Hinge Pin & Spring

Hinge Pin & Spring compatible with GHD MK3.1, SS2, 4.0, 4.1, early version 4.2, Early Version MS4.0 & Early Version SS4.0 (Early version...
Cable Restrainer

Cable Restrainer

The small platic restrainer that holds the cable in place located in the cable cover. Compatible with all GHD's which take the MK3 cable: MK3, MS,...
R8 100ohm Resistor

R8 100ohm Resistor

The R8 is situated on the mk4 PCB and is a common fault on these ghd models. Compatible with GHD MK4.0, 4.1 and early version 4.2 (Early version 4.2...
Thermistor NTC

Thermistor NTC

Thermistor NTC. Attaches to Non-Switch side heater to regulate temperature. This part comes undressed therefore requires insulating. We recommend...
MS4.0 Old Version Switch Arm

MS4.0 Old Version Switch Arm

Original used MS4.0 Old Version Switch Arm
MS4.0 Old Version Non Switch Arm

MS4.0 Old Version Non Switch Arm

Original used MS4.0 Old Version Non Switch Arm
MS4.0 Old Version Switch Cover

MS4.0 Old Version Switch Cover

Original used MS4.0 Old Version Switch Cover
MS4.0 Old Version Non Switch Cover

MS4.0 Old Version Non Switch Cover

Original used MS4.0 Older New Non Switch Cover
MS4.0 Old Version Cable Cover

MS4.0 Old Version Cable Cover

Original used MS4.0 Old Version Cable Cover